Kit Includes:

• 1 X Modular Plug Crimper Tool
• 1 X Jar Pull Through Connectors (50Pcs)
• 1 X Jar Pull Through Shielded Connectors (50Pcs)
• 1 X Cable Stripper

RJ45 OPEN-PASS MODULAR PLUG CRIMPER

Features:

• Crimps and cuts open-pass RJ45 modular plug and works on industry standard plug.
• Exposed wire ends are cut and trimmed off automatically with flat finish neatly while crimped.
• Ratchet mechanism provides less hand force perfect solution for CAT5e/6 solid or stranded cables.
• Ergonomic with dual-color grip handle enhances comfort and consistent terminations.
• Strips/cuts round cables.

EZC6UTP Connector - CAT6 and CAT5 JAR 50Pcs

Simplify twisted pair terminations by allowing the wires to be inserted through the connector and out the front, to easily verify the proper wiring order. Pulling the connector down over the cable jacket seating it tightly in the rear of the connector optimizes electrical performance of the termination. Reducing the distance between the wire twists and contacts also improves performance.

Features:

• Through holes allow wire pairs to be inserted through front of connector for faster terminations
• EZ to verify wire sequence
• More reliable and higher performance
• Works with solid or stranded wire - separate connectors not required, reducing inventory and confusion
• Reduces scrap by eliminating wasted crimps
• Simple one-piece design - bars or liners not required
• Use in Category 3, 5, 5E or 6 compliant data networks
• FCC & RoHS compliant
• UL Rated
• Easy Pull Through Design

EZC6STP Connector Shielded- CAT6 and CAT5 JAR 50Pcs

Simplify twisted pair terminations by allowing the wires to be inserted through the connector and out the front, to easily verify the proper wiring order. Pulling the connector down over the cable jacket seating it tightly in the rear of the connector optimizes electrical performance of the termination. Reducing the distance between the wire twists and contacts also improves performance.

Features:

• Through holes allow wire pairs to be inserted through front of connector for faster terminations
• EZ to verify wire sequence
• More reliable and higher performance
• Works with solid or stranded wire - separate connectors not required, reducing inventory and confusion
• Reduces scrap by eliminating wasted crimps
• Simple one-piece design - bars or liners not required
• Use in Category 3, 5, 5E or 6 compliant data networks
• FCC & RoHS compliant
• UL Rated
• Easy Pull Through Design
• Shielded

Cable Stripper for UTP/STP and RG59/6

Instructions:

1. This stripper is available for stripping UTP/STP and RG59/6 cables. Cassettes are switchable.
2. When stripping UTP/STP cables, make sure your UTP/STP cassette is under the stripping nest. Straightening wire function is included in the tool.
3. When stripping RG59/6 cables, make sure the RG59/6 cassette is in position as well. Insert the cable until it touches the stopper, turn the stripper in clockwise direction by 1-4 times, it depends on the thickness of the jacket.
4. Stripping length is 1/4” (6.4mm) each for both dielectric insulator and center core.